View IRFBA1405PPBF_8237833.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

hexfet ? power mosfet s d g v dss = 55v r ds(on) = 5.0m i d = 174a description www.irf.com 1 advanced process technology ultra low on-resistance dynamic dv/dt rating 175c operating temperature fast switching repetitive avalanche allowed up to tjmax benefits IRFBA1405PPBF stripe planar design of hexfet ? power mosfets utilizes the latest processing techniques to achieve extremely low on-resistance per silicon area. additional features of this mosfet are a 175 o c junction operating temperature, fast switching speed and improved ruggedness in single and repetitive avalanche. the super-220 tm is a package that has been designed to have the same mechanical outline and pinout as the industry standard to-220 but can house a considerably larger silicon die. the result is significantly increased current handling capability over both the to-220 and the much larger to-247 package. the combination of extremely low on-resistance silicon and the super-220 tm package makes it ideal to reduce the component count in multiparalled to-220 applications, reduce system power dissipation, upgrade existing designs or have to-247 performance in a to-220 outline. this package has been designed to meet automotive, q101, qualification standard. these benefits make this design an extremely efficient and reliable device for use in a wide variety of applications.

parameter max. units i d @ t c = 25c continuous drain current, v gs @ 10v 174 i d @ t c = 100c continuous drain current, v gs @ 10v 123 a i dm pulsed drain current 680 p d @t c = 25c power dissipation 330 w linear derating factor 2.2 w/c v gs gate-to-source voltage 20 v e as single pulse avalanche energy 560 mj i ar avalanche current see fig.12a, 12b, 15, 16 a e ar repetitive avalanche energy mj dv/dt peak diode recovery dv/dt 5.0 v/ns t j operating junction and -40 to + 175 t stg storage temperature range -55 to + 175 soldering temperature, for 10 seconds 300 (1.6mm from case ) recommended clip force 20 n c typical applications industrial motor drive

2 www.irf.com parameter min. typ. max. units conditions v (br)dss drain-to-source breakdown voltage 55 ??? ??? v v gs = 0v, i d = 250 a v (br)dss / t j breakdown voltage temp. coefficient ??? 0.057 ??? v/c reference to 25c, i d = 1ma r ds(on) static drain-to-source on-resistance ??? 4.3 5.0 m v gs = 10v, i d = 101a v gs(th) gate threshold voltage 2.0 ??? 4.0 v v ds = 10v, i d = 250 a g fs forward transconductance 69 ??? ??? s v ds = 25v, i d = 110a ??? ??? 20 a v ds = 55v, v gs = 0v ??? ??? 250 v ds = 44v, v gs = 0v, t j = 150c gate-to-source forward leakage ??? ??? 200 v gs = 20v gate-to-source reverse leakage ??? ??? -200 na v gs = -20v q g total gate charge ??? 170 260 i d = 101a q gs gate-to-source charge ??? 44 66 nc v ds = 44v q gd gate-to-drain ("miller") charge ??? 62 93 v gs = 10v t d(on) turn-on delay time ??? 13 ??? v dd = 38v t r rise time ??? 190 ??? i d = 110a t d(off) turn-off delay time ??? 130 ??? r g = 1.1 t f fall time ??? 110 ??? v gs = 10v between lead, ??? ??? 6mm (0.25in.) from package and center of die contact c iss input capacitance ??? 5480 ??? v gs = 0v c oss output capacitance ??? 1210 ??? pf v ds = 25v c rss reverse transfer capacitance ??? 280 ??? ? = 1.0mhz, see fig. 5 c oss output capacitance ??? 5210 ??? v gs = 0v, v ds = 1.0v, ? = 1.0mhz c oss output capacitance ??? 900 ??? v gs = 0v, v ds = 44v, ? = 1.0mhz c oss eff. effective output capacitance ??? 1500 ??? v gs = 0v, v ds = 0v to 44v nh electrical characteristics @ t j = 25c (unless otherwise specified) l d internal drain inductance l s internal source inductance ??? ??? s d g i gss ns 4.5 7.5 i dss drain-to-source leakage current s d g parameter min. typ. max. units conditions i s continuous source current mosfet symbol (body diode) ??? ??? showing the i sm pulsed source curre nt integral reverse (body diode) ??? ??? p-n junction diode. v sd diode forward voltage ??? ??? 1.3 v t j = 25c, i s = 101a, v gs = 0v t rr reverse recovery time ??? 88 130 ns t j = 25c, i f = 101a q rr reverse recoverycharge ??? 250 380 nc di/dt = 100a/ s t on forward turn-on time intrinsic turn-on time is negligible (turn-on is dominated by l s +l d ) source-drain ratings and characteristics 174 680 thermal resistance parameter typ. max. units r jc junction-to-case ??? 0.45 c/w r cs case-to-sink, flat, greased surface 0.50 ??? r ja junction-to-ambient ??? 58

www.irf.com 3 fig 4. normalized on-resistance vs. temperature fig 2. typical output characteristics fig 1. typical output characteristics fig 3. typical transfer characteristics 1 10 100 1000 0.1 1 10 100 20 s pulse width t = 25 c j top bottom vgs 15v 10v 8.0v 7.0v 6.0v 5.5v 5.0v 4.5v v , drain-to-source voltage (v) i , drain-to-source current (a) ds d 4.5v 10 100 1000 0.1 1 10 100 20 s pulse width t = 175 c j top bottom vgs 15v 10v 8.0v 7.0v 6.0v 5.5v 5.0v 4.5v v , drain-to-source voltage (v) i , drain-to-source current (a) ds d 4.5v 1 10 100 1000 4 6 8 10 12 v = 25v 20 s pulse width ds v , gate-to-source voltage (v) i , drain-to-source current (a) gs d t = 25 c j t = 175 c j -60 -40 -20 0 20 40 60 80 100 120 140 160 180 0.0 0.5 1.0 1.5 2.0 2.5 3.0 t , junction temperature ( c) r , drain-to-source on resistance (normalized) j ds(on) v = i = gs d 10v 169a

4 www.irf.com fig 8. maximum safe operating area fig 6. typical gate charge vs. gate-to-source voltage fig 5. typical capacitance vs. drain-to-source voltage fig 7. typical source-drain diode forward voltage 0 60 120 180 240 300 0 4 8 12 16 20 q , total gate charge (nc) v , gate-to-source voltage (v) g gs for test circuit see figure i = d 13 101a v = 27v ds v = 44v ds 1 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 v ,source-to-drain voltage (v) i , reverse drain current (a) sd sd v = 0 v gs t = 25 c j t = 175 c j 1 10 100 1000 10000 1 10 100 operation in this area limited by r ds(on) single pulse t t = 175 c = 25 c j c v , drain-to-source voltage (v) i , drain current (a) i , drain current (a) ds d 10us 100us 1ms 10ms 1 10 100 v ds , drain-to-source voltage (v) 100 1000 10000 100000 c , c a p a c i t a n c e ( p f ) coss crss ciss v gs = 0v, f = 1 mhz c iss = c gs + c gd , c ds shorted c rss = c gd c oss = c ds + c gd

www.irf.com 5 fig 11. maximum effective transient thermal impedance, junction-to-case fig 9. maximum drain current vs. case temperature v ds 90% 10% v gs t d(on) t r t d(off) t f
1 0.1 %
+ - fig 10a. switching time test circuit fig 10b. switching time waveforms 25 50 75 100 125 150 175 0 40 80 120 160 200 t , case temperature ( c) i , drain current (a) c d limited by package 0.001 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 notes: 1. duty factor d = t / t 2. peak t = p x z + t 1 2 j dm thjc c p t t dm 1 2 t , rectangular pulse duration (sec) thermal response (z ) 1 thjc 0.01 0.02 0.05 0.10 0.20 d = 0.50 single pulse (thermal response)

6 www.irf.com q g q gs q gd v g charge d.u.t. v ds i d i g 3ma v gs .3 f 50k .2 f 12v current regulator same type as d.u.t. current sampling resistors + - fig 13b. gate charge test circuit fig 13a. basic gate charge waveform fig 12c. maximum avalanche energy vs. drain current fig 12b. unclamped inductive waveforms fig 12a. unclamped inductive test circuit t p v (br)dss i as r g i as 0.01 t p d.u.t l v ds + - v dd driver a 15v 20v fig 14. threshold voltage vs. temperature 25 50 75 100 125 150 175 0 200 400 600 800 1000 1200 starting t , junction temperature ( c) e , single pulse avalanche energy (mj) j as i d top bottom 41a 71a 101a -75 -50 -25 0 25 50 75 100 125 150 175 t j , temperature ( c ) 1.5 2.0 2.5 3.0 3.5 4.0 v g s ( t h ) , v a r i a c e ( v ) i d = 250 a

www.irf.com 7 fig 15. typical avalanche current vs.pulsewidth fig 16. maximum avalanche energy vs. temperature notes on repetitive avalanche curves , figures 15, 16: (for further info, see an-1005 at www.irf.com) 1. avalanche failures assumption: purely a thermal phenomenon and failure occurs at a temperature far in excess of t jmax . this is validated for every part type. 2. safe operation in avalanche is allowed as long ast jmax is not exceeded. 3. equation below based on circuit and waveforms shown in figures 12a, 12b. 4. p d (ave) = average power dissipation per single avalanche pulse. 5. bv = rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. i av = allowable avalanche current. 7. t = allowable rise in junction temperature, not to exceed t jmax (assumed as 25c in figure 15, 16). t av = average time in avalanche. d = duty cycle in avalanche = t av f z thjc (d, t av ) = transient thermal resistance, see figure 11) p d (ave) = 1/2 ( 1.3bvi av ) = t/ z thjc i av = 2 t/ [1.3bvz th ] e as (ar) = p d (ave) t av 1.0e-08 1.0e-07 1.0e-06 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 tav (sec) 1 10 100 1000 a v a l a n c h e c u r r e n t ( a ) 0.05 duty cycle = single pulse 0.10 allowed avalanche current vs avalanche pulsewidth, tav assuming tj = 25c due to avalanche losses 0.01 25 50 75 100 125 150 175 starting t j , junction temperature (c) 0 100 200 300 400 500 600 e a r , a v a l a n c h e e n e r g y ( m j ) top single pulse bottom 10% duty cycle i d = 101a

8 www.irf.com
for n-channel hexfet ? power mosfets p.w. period di/dt diode recovery dv/dt ripple 5% body diode forward drop re-applied voltage reverse recovery current body diode forward current v gs =10v v dd i sd driver gate drive d.u.t. i sd waveform d.u.t. v ds waveform inductor curent d = p. w . period

+ - + + + - - - ? ! ? " !
#!$%
% ?
&
'#!#' ? ()!"# ? *#+ ? (,"# '# - +!
+&'.

www.irf.com 9 repetitive rating; pulse width limited by max. junction temperature. (see fig. 11). starting t j = 25c, l = 0.11mh r g = 25 , i as = 101a. (see figure 12). i sd 101a, di/dt 210a/ s, v dd v (br)dss , t j 175c pulse width 400 s; duty cycle 2%.
c oss eff. is a fixed capacitance that gives the same charging time as c oss while v ds is rising from 0 to 80% v dss .refer to an-1001 calculated continuous current based on maximum allowable junction temperature. package limitation current is 95a. limited by t jmax , see fig.12a, 12b, 15, 16 for typical repetitive avalanche performance. 2x a 123 3x 0.25 [.010] b a b 4x 4 0.25 3.00 [.118] 2.50 [.099] 14.50 [.570] 13.00 [.512] 4.00 [.157] 3.50 [.138] 1.30 [.051] 0.90 [.036] 2.55 [.100] 1.00 [.039] 0.70 [.028] 5.00 [.196] 4.00 [.158] 11.00 [.433] 10.00 [.394] 1.50 [.059] 0.50 [.020] 15.00 [.590] 14.00 [.552] 9.00 [ . 8.00 [ . 13.50 [ 12.50 [

notes: 1. for an automotive qualified version of this part please see http://www.irf.com/product-info/auto 2. for the most current drawing please refer to ir website at http://www.irf.com/package/

10 www.irf.com ir world headquarters: 101n. sepulvedablvd, el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7903 visit us at www.irf.com for sales contact information . 08/2011
not recommended for surface mount application super-220 (to-273aa) part marking information top example: this is an irfba22n50a with assembly lot code 1789 assembly lot code international rectifier logo 89 irfba22n50a 17 year 7 = 1997 line c week 19 date code part number assembled on ww 19, 1997 in the assembly line "c" 719c note: "p" in assembly line position indicates "lead-free" data and specifications subject to change without notice. this product has been designed and qualified for the industrial market. qualification standards can be found on ir?s web site. notes: 1. for an automotive qualified version of this part please see http://www.irf.com/product-info/auto 2. for the most current drawing please refer to ir website at http://www.irf.com/package/

▲Up To Search▲

Price & Availability of IRFBA1405PPBF

	To Download IRFBA1405PPBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .